The odometer with two counters for beginners and purists with metal housing.
Everything you need - a very small device with total and partial distance counting in great workmanship.
A system reset and optional cutting computer connection make this odometer an attractive aid for professionals as well.
Here you can download a manual_rallyemasterbasic_vd.
Please have a look at it. Many questions are answered by the description and installation instructions.
For the somewhat experienced screwdriver, the installation is not a great challenge. However, a few things need to be observed and then there will soon be nothing standing in the way of "calibrating" the odometer and a first test drive.
The RallyeMaster Basic is a professional odometer with extremely small dimensions. It has two totalizers for the total and the partial distance. High-quality electromechanical totalizers with mechanical zero setting. Housing made of solid steel, matt black coating.
Further features:
System reset
Possibility to connect a cutting computer
Calibration on the front
Small construction
Mounting bracket
Technical data:
Dimensions W/H/D 148/58/90 mm
(housing, without switch)
Operating voltage 12-14 volts
Output voltage sensor 5 Volt
Connection cutting computer pulse 10m/operating voltage 12V
Please note:
The odometer RALLYEMASTER BASIC2 is delivered without sensor as standard.
In principle, only sensors with an operating voltage of 5V are to be connected.
When using the VDO sensor, insert a 3 kOhm resistor between the blue and brown cables.
If you subsequently connect another sensor, this resistor may have to be removed!
Please observe the connection instructions of the respective sensor manufacturer.
Usable sensors:
With your RALLYEMASTER BASIC2, various sensors/pulse generators with two or three connection cables can be used.
- Speedometer sensor
- Wheel sensor
- Cardan shaft sensor
You can also find sensors here in the shop.